Garmin GMR FANTOM OPEN ARRAY Series 설치 지침 매뉴얼 - 페이지 9

{카테고리_이름} Garmin GMR FANTOM OPEN ARRAY Series에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GMR FANTOM OPEN ARRAY Series 19 페이지.

Connecting to Power

When connecting the power cable, do not remove the in-line fuse holder. To prevent the possibility of injury or

product damage caused by fire or overheating, the appropriate fuse must be in place as indicated in the product

specifications. In addition, connecting the power cable without the appropriate fuse in place voids the product

warranty.

Item

Description

To the Garmin Marine Network

15 A fuse holder

To the boat battery (from 10 to 32 Vdc)

Water ground connection

1 Route the power cable to the radar and boat battery.

2 Connect the power cable to the boat battery.

3 Connect the power cable to the POWER port on the radar.

Power Cable Extensions

Connecting the power cable directly to the battery is recommended. If it is necessary to extend the cable, the

appropriate gauge of wire must be used for the length of the extension.

You must use crimp connectors and heat-shrink to create a water-resistant connection.

Distance

3 m (9 ft. 10 in.)

5 m (16 ft. 4 in.)

6.5 m (21 ft. 3 in.)

8 m (26 ft. 2 in.)

WARNING

Wire Gauge

3.31 mm² (12 AWG)

5.26 mm² (10 AWG)

6.63 mm² (9 AWG)

8.36 mm² (8 AWG)