AEG F89078VI-S 사용자 설명서 - 페이지 18

{카테고리_이름} AEG F89078VI-S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG F89078VI-S 20 페이지. 18” fully integrated dish washer
AEG F89078VI-S에 대해서도 마찬가지입니다: 사용자 설명서 (35 페이지), 일반 매뉴얼 (43 페이지)

페이지 인쇄

USER INSTRUCTIONS

TROUBLESHOOTING

The dishwasher can to signal a number of malfunctions by turning on various

indicator lights, as described below (see following table):

FAULT

Rev 0.0

DESCRIPTION

Acquastop failure

The anti-fl ooding system has tripped (only for models

fi tted with this feature). Activates in case of water leaks.

Contact the technical assistance service.

Safety level

The system limiting the water level in the dishwasher

has tripped. Interrupt the current program. Switch off

the dishwasher, switch it back on again, program a new

cycle and press start. If the problem persists, contact the

technical assistance service.

Water heating malfunction

The water is not heated or is incorrectly heated. Repeat

the washing program; if the problem persists, contact the

technical assistance service.

Water temperature monitoring malfunction

Interrupt the current program. Switch off the dishwasher,

switch it back on again, program a new cycle and press

start. If the problem persists, contact the technical

assistance service.

Water intake malfunction

The appliance does not take in water or does so

incorrectly. Make sure the water connections are correct,

that the water supply tap is open and that the fi lter is not

clogged. If the problem persists, contact the technical

assistance service.

Tab. 5-01a