AEG FAV88070VI 사용자 정보 - 페이지 16

{카테고리_이름} AEG FAV88070VI에 대한 사용자 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG FAV88070VI 48 페이지. Electrolux group (ire) ltd user information dishwasher favorit 88070

페이지 인쇄

Setting the Amount of Rinse Aid Required

Only change the amount dispensed, if smears, milky spots (reduce the

amount) or dried on water spots (increase the amount) can be seen on

glasses and dishes. (See section "If dishwashing results are not satisfac-

tory".) The dosage can be set from 1-6. The dosage is pre-set to "4" in

the factory.

1. Open the dishwasher door.

2. Press the release button on the rinse

aid compartment.

3. Open the cover.

4. Set the dosage level.

5. Press the lid shut until it clicks into

place.

6. If rinse aid has leaked out, wipe it

away with a cloth.

Activating/Deactivating the Rinse Aid dispenser

When the 3 IN 1 option is activated, you do not need to deactivate the

rinse aid dispenser.

1. Press the ON/OFF button.

If the name of a stage of a cycle is shown on the display, this means a

programme is active. You must first of all cancel the programme:

– Press the RESET key combination.

The display will read CONFIRM CANCEL?

– Press the OK/START button. This will cancel the programme.

2. Go to the RINSE AID setting; see the section "Adapting an option/set-

ting".

3. If required, set the right value.

If the value is ON, the rinse aid dispenser is activated; if the value is

OFF, it is deactivated.