Garmin GPSMAP 547xs Guide 참조 매뉴얼 - 페이지 2
{카테고리_이름} Garmin GPSMAP 547xs Guide에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GPSMAP 547xs Guide 2 페이지. Technical reference for garmin nmea 2000 products
Garmin GPSMAP 547xs Guide에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (12 페이지), 사용자 설명서 (28 페이지), 제품 정보 (37 페이지), 사용 설명서 (28 페이지), 템플릿 (2 페이지), 적합성 선언 (6 페이지), 구성 매뉴얼 (2 페이지), 참조 (42 페이지), 빠른 시작 매뉴얼 (4 페이지), 설치 지침 매뉴얼 (8 페이지), 소유자 매뉴얼 (38 페이지)
페이지 인쇄
Turning the Unit On and Acquiring a Signal
See the Important Safety and Product Information guide in the product box for product warnings and other
important information.
Turning the Unit On or Off
To turn on the unit, press and release the
Power
key. When the Warning
screen appears, select
I Agree
to view the Home screen. To turn off the
Power
unit, press and hold the
key.
Acquiring GPS Satellite Signals
When you turn on the unit, the GPS receiver must collect satellite data and
establish the current location. When the unit acquires satellite signals, the
signal strength bars at the top of the Home screen are green
unit loses satellite signals, the green bars disappear
and the position
icon displays a flashing question mark.
Please visit
www.garmin.com
for additional documentation and information.
Adjusting the Display Settings
To adjust the backlight:
1. Press and release the Power key.
2. Select Backlight.
3. Press left or right on the Rocker to manually adjust the backlight.
Note: Press the
Power
key repeatedly to cycle between
maximum backlight, minimum backlight, and your manual setting.
To switch between day mode and night
mode:
1. Press and release the Power key.
2.
Select Color
Mode.
3. Press left or right on the Rocker to switch
between modes.
Day Mode
PoWeR/BACKLIGHt—Press and hold to turn the unit
on or off; press and release to adjust the backlight and the
day and night modes.
RANGe (-/+)—Press to adjust the range of the sonar, to
zoom in or out on a chart, to page up or down on lists, or to
adjust the backlight level.
RoCKeR—Press up, down, left, or right to move through
menus, highlight fields, and enter data.
MARK—Press to mark a waypoint.
SeLeCt—Press to select highlighted items.
. When the
Home Screen
HoMe—Press to return to the Home screen.
MeNU—Press to access additional settings and configuration options; press to return to the
previous screen when indicated.
Panning and Zooming on the Navigation Chart
Use the
Rocker
to other areas on the Navigation chart. As you pan past the edge of the current map display,
the screen scrolls forward to provide continuous map coverage.
Map pointer
Zooming In and Out on the Map
The Range (-/+) keys control the zoom level, indicated by the scale at the bottom of the
Navigation chart (
Night Mode
Using the Keypad
to move the map pointer (
) away from your current location and to scroll
As you move the map pointer, you can view the
distance and bearing from your current location and
the map pointer location coordinates in the lower-
right corner of the map.
To pan the map, press up, down, right, or left on the
Rocker.
). The bar under the number represents that distance on the map.
Using Routes and Tracks
POWER/
To create a route from your present location:
BACKLIGHT
1. From the Navigation chart, use the map pointer (
RANGE
destination and press SELECT.
2.
Select Navigate To > Route
To.
ROCKER
3. Use the map pointer (
) to select the location at which you want to
MARK
make the last turn toward your destination.
SELECT
4. Press SELECT. Repeat this step to add additional turns.
5. Press MENU to cancel, to undo the last turn, or to begin navigating the
MENU
route.
HOME
To create a route in another location:
1.
From the Home screen, select Information > User Data > Routes > New
2.
Select Use Chart or Use Waypoint
3.
If you select Use
Chart, use the map pointer (
want to start the new route. If you select Use Waypoint
route and press SELECT.
4. Choose the location of the first turn and press SELECT. Repeat until the route is complete.
5. Select MENU to save the route.
6. Select the route to edit the route, delete the route, or navigate to the route.
To edit a route:
1.
From the Home screen, select Information > User
2. Select the route to edit.
3.
Select Edit
Route. You can edit the route name or use the chart or turn list to edit the route
turns.
To turn on the track log:
From any chart except the Fish Eye 3D, select MENU > Waypoints & Tracks
A trailing line on the chart indicates your track.
To clear the active track:
From any chart except the Fish Eye 3D, select MENU > Waypoints & Tracks > Active Tracks
> Clear Active
Track. The track memory is cleared; the current track continues to be recorded.
© 2009 Garmin Ltd. or its subsidiaries
May 2009
190-01074-01 Rev. A
) to highlight your
Route.
List.
) to select the initial location at which you
List, select the first waypoint on the
Data > Routes.
> Tracks > On.
Printed in Taiwan