AEG FAVORIT 33060 I 사용자 지침 - 페이지 34

{카테고리_이름} AEG FAVORIT 33060 I에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG FAVORIT 33060 I 40 페이지. Aeg dishwasher user manual

Installation and Connection Instructions

Water drain

Drain hose

The drain hose must not be kinked, crushed or entangled.

• Connecting the drain hose:

– Maximum permitted height: 1 metre.

– Minimum required height 40 cm above the lower edge of the

machine.

Extension hoses

• Extension hoses are available from

your dealer or customer service.

The internal diameter of the exten-

sion hoses must be 19 mm to

ensure that the function of the

appliance is not impeded.

• Extension hoses may be laid a max-

imum of 3 metres horizontally; the

maximum permitted height for the

connection for the drain hose is

then 85 cm.

Sink outlet connection

• The outlet of the drain hose (ø 19 mm) fits all commonly available

sink outlet spigot types. The outer diameter of the spigot connection

must be at least 15 mm.

• The drain hose must be fixed to the sink outlet connection using the

hose clamp supplied.

If the dishwasher is fitted at a high position

If the dishwasher is installed at a high level, and the drainhose connec-

tion is less than 30 cm from the bottom of the appliance, adapter kit

ET 111099520 must be fitted. This is available from Customer Service.

Water drain into wash basins (only possible with free-standing

appliances)

In the case that you wish to hang the drain hose in a wash basin, use a

detachable hose elbow. You can obtain this from AEG customer service

under spare part number ET 646 069 190.

1. Fit the elbow to the drain hose.

2. Secure the drain hose against sliding off the edge of the wash basin.

Pass a piece of cord through the hose elbow and fix it to the wall or the

tap.