AEG FAVORIT 3A 사용자 지침 - 페이지 28

{카테고리_이름} AEG FAVORIT 3A에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG FAVORIT 3A 48 페이지. Aeg dishwasher
AEG FAVORIT 3A에 대해서도 마찬가지입니다: 사용자 지침 (40 페이지), 사용자 지침 (44 페이지)

페이지 인쇄

Operating Instructions

Starting a programme

1. Check that the dishes and cutlery are stacked in the dishwasher in such

a way that the spray arms are free to rotate.

2. Turn on the water tap fully.

3. Close the door.

4. Press the ON/OFF button.

The LED in the ON/OFF button will illuminate.

5. Press the relevant button for the programme required (see "Programme

Chart").

The programme display will become illuminated. The remaining time

for the programme will be shown in the multi-display.

The selected programme will begin after approximately 3 seconds.

During the programme, the remaining time shown in the multi-display

may be adjusted according to amount of dishes, degree of soiling, etc.

If an error message is displayed in the multi-display after the pro-

gramme has started, please read the section "What to do if ...".

Changing/interrupting/cancelling a programme

Only change or interrupt a programme that is in progress if it is abso-

lutely necessary. After the appliance has been closed again, the air that

has entered will be heated significantly and expand. As a result, water

may collect in the base of the appliance and trigger the anti-flood sys-

tem.

Changing a programme

If you would like to change the programme in the first 3 seconds after

having selected a programme, briefly press the button for the new pro-

gramme.

If you would like to change the programme after this time, proceed as

follows:

1. Press the button for the new programme and hold it down.

The indicator for the programme that is currently running will flash.

After several seconds only the indicator for the new programme will be

flashing.

2. Release the programme button.

The newly selected programme will begin.