Garmin NMEA 2000 참조 - 페이지 27

{카테고리_이름} Garmin NMEA 2000에 대한 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin NMEA 2000 42 페이지. Technical reference for garmin nmea 2000 products
Garmin NMEA 2000에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (10 페이지), 데이터시트 (1 페이지), 기술 참조 (30 페이지), 기술 참조 (42 페이지), 사용 설명서 (20 페이지), 설치 지침 매뉴얼 (40 페이지), 기술 참조 (20 페이지)

페이지 인쇄

NMEA 2000-Certified Sensor Configuration Information

Garmin NMEA 2000-certified sensors each have a Sensor Configuration Guide included in the package. For convenience, this section contains

the configuration information for all Garmin NMEA 2000 sensor. All NMEA 2000 device configuration options are set from the NMEA 2000

configuration menu on your NMEA 2000 display device.

important: To access the NMEA 2000 configuration menu on your display device, consult the documentation provided with your display

device.

GPS 17x (GPS Antenna)

Enabling and Disabling WAAS (Wide Area Augmentation System)/EGNOS (Euro Geostationary

Navigation Overlay Service)

When enabled, WAAS/EGNOS provides more-accurate position information. For more information on WAAS/EGNOS, visit www.garmin.com.

1. While viewing the NMEA 2000 configuration menu, select the GPS 17x device.

2. Select

Config

WAAS/EGNOS.

3. On a Garmin chartplotter, select

Setting the Speed Filter

The speed filter setting on the GPS 17x can help reduce unnecessary drift alarm triggers as well as potentially sporadic position information.

The speed filter averages the data provided by the GPS 17x to provide smoother position data updates. The speed filter is most helpful when

stationary or in low-speed situations.

1. While viewing the NMEA 2000 configuration menu, select the GPS 17x device.

2. Select

Config

Speed

Filter.

3. Choose from the following options:

• Off—position information from the GPS 17x is provided to the NMEA 2000 network as it is gathered.

• On—position information from the GPS 17x is gathered and averaged before it is provided to the NMEA 2000 network. Select the interval

at which the position information is gathered.

• Auto—the speed filter toggles on in low-speed situations and toggles off in high-speed situations.

Refreshing GPS Satellite Acquisition

In some situations, if you have moved the boat many miles without using the GPS 17x, for example, you can force the GPS 17x to re-initialize

and find your current position.

1. While viewing the NMEA 2000 configuration menu, select the GPS 17x device.

2. Select

Config

Auto

Locate.

3. Wait for the GPS 17x to acquire satellites.

Restoring Factory Default Settings

You can restore factory default settings to the GPS 17x. You will lose all custom configuration settings when you restore factory default

settings.

To restore factory default settings:

1. While viewing the NMEA 2000 configuration menu, select the GPS 17x device.

Config

Factory

2. Select

Technical Reference for Garmin NMEA 2000 Products

or Off.

Defaults.

NMEA 2000-Certified Sensor Configuration Information