Garmin Reactor 40 Kicker 설치 지침 매뉴얼 - 페이지 2

{카테고리_이름} Garmin Reactor 40 Kicker에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Reactor 40 Kicker 29 페이지.
Garmin Reactor 40 Kicker에 대해서도 마찬가지입니다: 구성 매뉴얼 (6 페이지), 구성 매뉴얼 (8 페이지)

페이지 인쇄

Tools and Supplies Needed

• Safety glasses

• Drill and drill bits

• Wrenches

• 90 mm (3.5 in.) hole saw or a rotary cutting tool (for installing an optional helm control)

• Wire cutters/strippers

• Phillips and flat screwdrivers

• Cable ties

• Waterproof wire connectors (wire nuts) or heat-shrink tubing and a heat gun

• Dielectric grease

• Marine sealant

• Portable or handheld compass (to test for magnetic interference)

• White lithium grease

• Stainless steel tilt tube (required if the vessel does not have a stainless steel tilt tube installed)

• Thin cloth or small sponge (for cleaning the inside of the tilt tube)

NOTE: Mounting screws are provided for the main components of the autopilot system. If the provided screws

are not appropriate for the mounting surface, you must provide the correct types of screws.