AEG FAVORIT 43070 Vi 사용자 정보 - 페이지 28

{카테고리_이름} AEG FAVORIT 43070 Vi에 대한 사용자 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG FAVORIT 43070 Vi 44 페이지. Aeg the fully integratable dishwasher

페이지 인쇄

What to do if...

Remedying small malfunctions

If the acoustic signal is activated, warning tones sound if there are

faults.

If while the appliance is operating indicators on the control panel flash

or are lit up as described in the following table, please consult this to

find out how to remedy the fault.

After remedying the fault that is flashing in the first or second

rhythm in the programme progress display, press the button for the

dishwashing cycle that had already started. The cycle will continue.

In the case of other fault messages:

– Cancel the dishwashing cycle.

– Switch the appliance off and on again.

– Select dishwashing cycle.

If the fault is displayed again, please contact the Service Force Centre

and inform them of the fault message.

Malfunction

1 short warning tone,

continuously repeated,

can be heard,

the programme display for

the selected wash pro-

gramme is flashing:

the indicator for the end

of the wash programme is

flashing once

continuously .

(problems with water in-

flow).

Possible cause

Tap is blocked with limes-

cale or is faulty.

The tap is turned off.

The filter (where present) in

the threaded hose fitting

on the tap is blocked.

Filters in the base of the

washing compartment are

blocked.

Water inflow hose has not

been correctly positioned.

Remedy

Check the tap and have it

repaired, if necessary.

Turn on the tap.

Clean the filter in the

threaded hose fitting.

Cancel the dishwashing cy-

cle (see chapter: Starting a

dishwashing cycle),

clean filters (see chapter:

Cleaning the filters),

then start the dishwashing

cycle again.

Check the position of the

hose.