AEG FAVORIT 43470 I 사용자 정보 - 페이지 8
{카테고리_이름} AEG FAVORIT 43470 I에 대한 사용자 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG FAVORIT 43470 I 36 페이지. Aeg dishwasher favorit
페이지 인쇄Operating instructions
Setting electronically:
1. Press the ON/OFF button.
If indicators other than the ON/OFF button are lit, a programme
has been selected. The programme must be cancelled:
Press function buttons 2 and 3 simultaneously for approx. 2 seconds.
All other indicators will go out.
2. Press function buttons 2 and 3 simultaneously and keep them
pressed. The LED indicators for function buttons 1 to 3 will flash.
3. Press function button 1 again.
The LED indicator for function button 1 will flash, at the same time
the indicator light ENDE starts to flash.
The current level is indicated by the number of flashes of the
indicator light ENDE.
4. Pressing function button 1 increases the hardness setting by 1.
(Exception: hardness setting 1 follows hardness setting 10).
5. When the hardness setting is correct, press the ON/OFF button.
The hardness setting is now saved.
If the water softener is set electronically to "1", this switches off the
control indicator for special salt.
Water hardness
in °d 1
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
unter 4
1) (°d) German degree, measure of water hardness
2) (mmol/l) millimol per litre, international unit for water hardness
*) factory setting
8
in mmol/l 2
Range
9,0 - 12,5
7,6 - 8,9
6,5 - 7,5
IV
5,1 - 6,4
4,0 - 5,0
3,3 - 3,9
III
2,6 - 3,2
1,9 - 2,5
II
0,7 - 1,8
I/II
unter 0,7
I
Adjusting the hardness
setting
Manual
Electronic
10
9
8
*2
7
6
5
4*
3
2
1
1
no salt
necessary
Number of
flashes
10
9
8
7
6
5
4
3
2
1