AEG FAVORIT 44010 VI 사용자 설명서 - 페이지 36

{카테고리_이름} AEG FAVORIT 44010 VI에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG FAVORIT 44010 VI 40 페이지. Electrolux dishwasher user manual

Water connection

• The electrical cable for the safety valve is in the double-walled water inlet hose.

Do not immerse the water inlet hose or the safety valve in water.

• If water inlet hose or the safety valve is damaged, remove the mains plug

immediately.

• A water inlet hose with safety valve must only be replaced by a specialist or by

the Service Force Centre.

WARNING!

Warning! Dangerous voltage.

Water outlet hose connection

The end of the drain hose can be connected in the following ways:

1. To the sink outlet spigot, securing it to the underside of the work surface. This

will prevent waste water from the sink running into the machine.

2. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.

The waste connection must be at a maximum

height of 60 cm from the bottom of the

dishwasher.

The drain hose can face either to the right or

left of the dishwasher.

Ensure the hose is not bent or squashed as this

could prevent or slow down the discharge of

water.

The sink plug must not be in place when the

machine is draining as this could cause the

water to syphon back into the machine.