AEG FAVORIT 44050 Vi 사용자 지침 - 페이지 10

{카테고리_이름} AEG FAVORIT 44050 Vi에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG FAVORIT 44050 Vi 48 페이지. Fully integratable dishwasher
AEG FAVORIT 44050 Vi에 대해서도 마찬가지입니다: 사용자 정보 (40 페이지)

페이지 인쇄
AEG FAVORIT 44050 Vi 사용자 지침
Operating Instructions

Water softener

To avoid scale deposits on the dishes and in the dishwasher, the dishes
must be washed with soft water, i.e. water with a low lime content. The
dishwasher therefore has a built-in water softener, in which tap water
with a hardness of 4°d (German degree) and harder is softened with the
aid of special salt.
Your water supplier will be able to inform you about the hardness and
3
hardness range of the water in your area.
The water softener can be set manually using the water hardness
switch; it can also be set electronically using the buttons on the control
panel.
2
In °d
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
under 4
1) The water hardness will only be indicated acoustically if the acoustic signal has
been activated.
2) (°d) German degree, measure of the hardness of water
3) [mmol/l] millimol per litre, international unit for the hardness of water
4) On this setting the length of the dishwashing cycle may be slightly longer.
*) Factory setting
10
Water hardness
3
Range
In mmol/l
9,0 - 12,5
7,6 - 8,9
6,5 - 7,5
IV
5,1 - 6,4
4,0 - 5,0
3,3 - 3,9
III
2,6 - 3,2
1,9 - 2,5
II
0,7 - 1,8
I/II
under 0.7
I
Adjusting the hardness
setting
Manually
Electronically
4
10
9
1
8
7
6
5
4*
3
0*
2
1
no salt
necessary
Number of
flashes and
1
acoustic signals
10
9
8
7
6
5
4
3
2
1