AEG FAVORIT 44050 Vi 사용자 지침 - 페이지 16

{카테고리_이름} AEG FAVORIT 44050 Vi에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG FAVORIT 44050 Vi 48 페이지. Fully integratable dishwasher
AEG FAVORIT 44050 Vi에 대해서도 마찬가지입니다: 사용자 정보 (40 페이지)

페이지 인쇄
AEG FAVORIT 44050 Vi 사용자 지침
Operating Instructions

Activating/deactivating the acoustic signal

The acoustic signal can indicate acoustically:
– at which water hardness the water softener is set.
– when a dishwashing cycle has finished.
– when an error has occurred with the dishwasher.
You can switch on/off the acoustic signal in the following way:
1. Press the ON/OFF button.
The LED indicators for all the buttons in the control panel that are now
able to be selected will become illuminated.
If the only LED indicator illuminated is one that belongs to a pro-
3
gramme button, this means that this dishwashing cycle has been acti-
vated. The dishwashing cycle must be cancelled (RESET):
Press function buttons 2 and 3 simultaneously for approx. 1 second.
The LED indicators for all the buttons in the control panel that are now
able to be selected will become illuminated.
2. Press function buttons 2 and 3 simultaneously and keep them pressed.
The LED indicators for function buttons 1 to 3 will flash.
3. Press function button 3.
The LED indicator for function button 3 will flash.
L
The
L
The
L
The
flashing:
4. Pressing function button 3 will change the setting.
5. Once the
OFF button. The setting is now saved.

In Daily Use

• Check the salt and rinse aid levels.
• Load cutlery and dishes into the dishwasher
• Fill with dishwasher detergent
• Select a wash programme suitable for the cutlery and dishes
• Start the wash programme
16
display will indicate the current setting:
indicator is flashing: Acoustic signal activated (ex-factory setting)
indicator is not
L
display is indicating the required setting, press the ON/
Acoustic signal deactivated