AEG FAVORIT 44070 i 사용자 정보 - 페이지 20

{카테고리_이름} AEG FAVORIT 44070 i에 대한 사용자 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG FAVORIT 44070 i 36 페이지. Aeg dishwasher
AEG FAVORIT 44070 i에 대해서도 마찬가지입니다: 사용자 정보 (36 페이지)

페이지 인쇄

Setting the Delay Timer

Using the delay timer you can delay the start of a dishwashing cycle for

3, 6 or 9 hours.

1. Press the ON/OFF button.

Press the Delay Timer button repeatedly until the indicator next to the

number of hours for which the start of the dishwashing cycle is to be

delayed lights up, e. g.

2. Select dishwashing cycle.

The LED indicator for the programme selected and the indicator next to

the number of hours will light up.

The dishwashing cycle will start automatically following a countdown

of the hours set.

To change the time delay:

As long as the cycle has not yet started, you can still change the setting

by pressing the DELAY TIMER button.

Cancelling the delay timer:

Press the DELAY TIMER button repeatedly until none of the three time

displays is lit. The selected dishwashing cycle will begin immediately.

To change a dishwashing cycle

As long as the cycle has not yet started, you can still change the dish-

washing cycle. First abort the dishwashing cycle, then re-set the time

delay, lastly select the new dishwashing cycle.

Switching off the dishwasher

Do not switch off the dishwasher until the indicator for the end of the

dishwasher cycle is illuminated in the cycle progress display.

With some dishwashing cycles, the drying fan continues to run even af-

ter the end of the cycle.

1. Press the ON/OFF button. All display indicators will go out.

2. Turn off the water tap.

Carefully open the door. Hot steam may escape.

Hot dishes are sensitive to knocks. Therefore leave the dishes to cool for

about 15 minutes before removing them. You also get a better drying

result.

, if the cycle is to start in 6 hours.