AEG FAVORIT 44080 I 사용자 정보 - 페이지 20

{카테고리_이름} AEG FAVORIT 44080 I에 대한 사용자 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG FAVORIT 44080 I 48 페이지. Electrolux user instructions dishwasher favorit 44080 i
AEG FAVORIT 44080 I에 대해서도 마찬가지입니다: 사용자 정보 (40 페이지), 사용자 설명서 (40 페이지)

페이지 인쇄

Using 3in1 detergents

These products are detergents with a combined cleaning, rinsing and

salt function.

When the 3in1 function is activated,

– the addition of special salt and rinse aid from the respective dispenser

is prevented.

– If the salt and rinse aid dispensers are empty, this is not indicated.

If you want to use 3in1 detergents, check whether these detergents are

suitable for your water hardness. (Follow the manufacturer's instruc-

tions.)

If you want to use 3in1 products

1. Press the ON/OFF button.

2. Press the 3 IN 1 button.

The button indicator lights up: 3in1 function is selected.

Before the start of the dishwashing cycle put 3in1 detergent in the de-

tergent dispenser.

As the rinse aid inflow is automatically switched off when the 3in1

function is activated, it may come about because of the different qual-

ity standards in the 3in1 detergent, that the dishes do not dry suffi-

ciently.

If this happens, proceed as follows (see section "Adding rinse aid"):

• Fill up the dispenser (if this is empty) with rinse aid.

• Set rinse aid dosage to "2" mechanically.

• Activate rinse aid inflow.

If you do not want to use 3in1 products any more

If you want to stop using 3in1 products, please do the following:

• Deactivate the 3in1 function.

• Fill up the dispensers for salt and rinse aid again.

• Switch the water softener to the highest setting and perform up to

three normal cycles without loading any dishes.

• Then set the water softener to the water hardness in your area.