AEG FAVORIT 44080 Vi 사용자 정보 - 페이지 23

{카테고리_이름} AEG FAVORIT 44080 Vi에 대한 사용자 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG FAVORIT 44080 Vi 48 페이지. Aeg dishwasher user manual

Starting a dishwashing cycle

1. Check that the spray arms can turn freely.

2. Turn the water tap on fully.

3. Close the door.

4. Press the ON/OFF button.

5. Select the desired cycle.

The programme indicator comes on. The remaining time expected for

the cycle will be shown in the multi-display.

During the dishwashing cycle, the remaining time shown in the multi-

display may be adjusted according to the size of the load, degree of

soiling, etc.

Interrupting or aborting a dishwashing cycle

Only interrupt a dishwashing cycle that is in progress if it is absolutely

necessary.

Interrupting the dishwashing programme by opening the dishwash-

er door

Hot steam may escape when the door is opened. There is a risk of scald-

ing.

1. Open the door carefully. The dishwashing cycle will stop.

2. Close the door. The cycle will continue.

Aborting the dishwashing cycle

1. Press function buttons 2 and 3 and keep them pressed.

The LED indicators of all the programme buttons that can be selected

light up.

2. Release the function buttons. The dishwashing cycle has been can-

celled.

3. If you want to start a new cycle, check whether there is any detergent

in the dispenser.

4. Switch off using the ON/OFF button.

Turning off the dishwasher will only interrupt a selected dishwashing

cycle, not cancel it. The cycle will recommence after turning the dish-

washer back on again.