Garmin GTX 335 Series 파일럿 매뉴얼 - 페이지 16
{카테고리_이름} Garmin GTX 335 Series에 대한 파일럿 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GTX 335 Series 36 페이지. All-in-one ads-b transponder
페이지 인쇄
2.4 Function Keys
FUNC
The FUNC key cycles through four menu groups shown on the right-hand side
of the display. Menu groups include:
◦
Transponder (XPDR)
◦
Timers (TMR)
◦
Altitude (ALT)
◦
System (SYS)
ENT
The ENT key acknowledges the selection of menu items and pilot data entry
fields.
CRSR
The CRSR key activates the cursor to select items in menus and on pages.
CLR
The CLR key clears selected entry and exits the menus.
8
The key enters the number eight in the Flight ID or Count Down timer.
It navigates up and between the functions and settings within a menu group.
9
The key enters the number nine in the Flight ID or Count Down timer.
It navigates down and between the functions and settings within a menu
group.
2.5 Remote Transponder Control
The GTX 3X5 transponder functions are controllable from connected, Garmin certified
displays (e.g., GTN) or G1000 integrated flight deck. When the GTX 3X5 is installed in a
location other than the cockpit instrument panel, remote control from a display is the only
GTX 3X5 flight crew interface available.
Remote transponder control includes:
◦
Squawk code
◦
IDENT
◦
Flight ID*
*When allowed by installation configuration.
Refer to the display's pilot guide for transponder control operation that is specific to each
display.
2-4
Table 2-3 Function Keys
◦
Transponder mode
◦
ADS-B transmit control*
◦
TIS traffic enable/disable (GTX 335 only)
GTX 335/345 Pilot's Guide
190-01499-00 Rev. C