Garmin GTX 345 파일럿 매뉴얼 - 페이지 20
{카테고리_이름} Garmin GTX 345에 대한 파일럿 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GTX 345 34 페이지. Enstrom 480b ads-b transponder
Garmin GTX 345에 대해서도 마찬가지입니다: 운영자 매뉴얼 (28 페이지), 운영자 매뉴얼 (28 페이지)
페이지 인쇄
3 – DISPLAY FUNCTIONS/SETTINGS
3.4
System (SYS)
Press
FUNC
key
Press
FU NC
key
BACKLIGHT
backlight level offset. The backlight level offset is via the CRSR and
8 and 9
CONTRAST
contrast level offset. The contrast level offset is via the CRSR and
8 and 9
NOTE
Messages are not high priority. Their purpose is to provide additional
information on abnormal system behavior. They do not require
immediate pilot action. Any transponder failure will immediately display
an alert with no pilot action necessary to view the alert. For
troubleshooting failure messages, refer to section 7.
MESSAGES
Viewing active system messages is via the CRSR key selection.
BLUETOOTH (GTX 345)
Bluetooth function. The Bluetooth function is automatically placed
into pairing mode when this page is displayed. Pairing must be
initiated by the PED and then confirmed on the GTX 345. The last 13
paired PEDs are saved. At system power on, the GTX 345
automatically connects to any available and previously saved paired
PEDs. PEDs that are currently connected and paired are
viewed/deleted via the CRSR and
on Bluetooth pairing refer to section 3.4.1. For information on
Connext Bluetooth features, refer to section 6
3-4
Press
FUNC
key
Press
FUN C
key
– This page displays the current backlight level and
keys.
– This page displays the current contrast level and
keys.
– This page displays the number of active system messages.
– This page displays the status of the GTX 345
Garmin GTX 335/345 Pilot's Guide
8
and
9
keys. For instructions
.
190-01499-00 Rev. A