Garmin GTX 3X5 Series 파일럿 매뉴얼 - 페이지 15
{카테고리_이름} Garmin GTX 3X5 Series에 대한 파일럿 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GTX 3X5 Series 34 페이지. All-in-one ads-b transponder
Garmin GTX 3X5 Series에 대해서도 마찬가지입니다: 파일럿 매뉴얼 (20 페이지)
페이지 인쇄
2.4
Function Keys
IDENT The IDENT key activates the IDENT function for 18 seconds. This distinguishes your
transponder from others on the air traffic controller's screen. The word "IDENT" will appear
in the upper left corner of the display during this time.
VFR
The VFR key sets the transponder code to the preprogrammed VFR code, which is selected
during installation configuration (this is set to 1200 at the factory).
To restore the previous identification code, press the VFR key a second time.
To toggle between these two codes, continue to press the VFR key.
FUNC
The FUNC key cycles through four menu groups shown on the right-hand side of the display.
Menu groups include:
Transponder (XPDR)
Timers (TMR)
Altitude (ALT)
System (SYS)
ENT
The ENT key acknowledges the selection of menu items and pilot data entry fields.
CRSR
The CRSR key activates the cursor to select items in menus and on pages.
CLR
The CLR key clears selected entry and exits the menus.
8
The key enters the number eight in the Flight ID or Count Down timer.
It navigates up and between the functions and settings within a menu group.
9
The key enters the number nine in the Flight ID or Count Down timer.
It navigates down and between the functions and settings within a menu group.
190-01499-00 Rev. A
Table 2-3 Function Keys
Garmin GTX 335/345 Pilot's Guide
2 – GTX 3X5 CONTROLS
2-3