AEG FAVORIT 44850 사용자 정보 - 페이지 11

{카테고리_이름} AEG FAVORIT 44850에 대한 사용자 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG FAVORIT 44850 36 페이지. Aeg dishwasher favorit

Setting the amount of rinse

aid required

Only change the amount dispensed, if smears, milky spots or dried on

water spots can be seen on glasses and dishes. (See section "If wash

results are not satisfactory"). The dosage can be set from 1-6. The

dosage is set to "4" in the factory.

1. Open the door of the dishwasher.

2. Press the release button on the

rinse aid compartment.

3. Open the cover.

4. Set the dosage level.

5. Press the lid shut until it clicks

into place.

6. If rinse aid has leaked out, wipe it

away with a cloth.

Activating/deactivating the inflow of rinse aid

If you press 3 in 1 button, you don't need to deactivate the inflow

of rinse aid.

1. Press the ON/OFF button.

If indicators other than the ON/OFF button are lit, a dishwashing

cycle is activated. The cycle must be deselected (RESET):

Press function buttons 2 and 3 simultaneously for approx. 2 seconds.

All other indicators will go out.

2. Press function buttons 2 and 3 simultaneously and keep them

pressed. The LED indicators for function buttons 1 to 3 will flash.

3. Press function button 2 again.

The LED indicator for function button 2 will flash.

The multi-display will indicate the current setting:

4. Pressing function button 2 activates and deactivates the rinse aid

dispensing function.

5. Once the multi-display is indicating the required setting, press the

ON/OFF button.

The setting is now saved.

Inflow of rinse aid is deactivated

Inflow of rinse aid is activated (factory setting)

Operating instructions

BR09