Garmin VHF 210 AIS series 소유자 매뉴얼 - 페이지 11

{카테고리_이름} Garmin VHF 210 AIS series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin VHF 210 AIS series 22 페이지.
Garmin VHF 210 AIS series에 대해서도 마찬가지입니다: 설치 지침 (4 페이지)

페이지 인쇄
Garmin VHF 210 AIS series 소유자 매뉴얼
The radio saves the position report in the call log.

Receiving Group Calls

When you receive a group call, GROUP appears on the screen,
and the radio prompts you to change to the requested channel.
If the channel requested is invalid, INVALID CH REQUEST
appears on the screen.
1
Select OK.
2
Turn the SELECT dial to select the requested channel.
3
Select OK.

Position Tracking

When you enable position tracking, the radio uses interval-
based position requests to track up to three vessels.
Your radio transmits received position data over the NMEA
network, and you can track the vessels using your Garmin
chartplotter
(Configuring DSC NMEA Transmissions,
page
9).

Selecting Vessels and Activating Position Tracking

Before you can use position tracking, you must have at least
one vessel saved in the directory
1
Select DSC > POS. TRACKING > ADD ENTRY.
2
Select the vessels you want to track.
You can track the position of up to three vessels at one time.
If you select a fourth vessel, the radio sounds an error tone,
and you must remove a vessel before you can add a new
one.
3
Select BEGIN TRACKING.
appears on the screen when the radio tracks vessels.
Position-Tracking Polling Interval Sequence
Regulations allow transmission of one position-request call
every five minutes. When tracking more than one vessel, the
radio alternates calling each vessel in the list at five-minute
intervals. If a vessel does not respond to five consecutive
position-request calls, the radio removes the vessel from the
position-tracking list.
You can use this table to better understand how the time interval
is applied to the vessels in the position-tracking list.
Vessel Time
Ship 1
0 minutes (immediately when starting position tracking)
Ship 2
5 minutes
Ship 3
10 minutes
Ship 1
15 minutes
Ship 2
20 minutes
Ship 3
25 minutes
Viewing and Deactivating Vessels on the Position
Tracking List
You can deactivate vessels that you want to keep in the tracking
list, but do not want to actively track.
1
Select DSC > POS. TRACKING > VESSELS.
2
Select a vessel.
3
Select OFF.

Deleting a Vessel From the Position Tracking List

You can delete vessels from the tracking list that you don't plan
to track in the future.
1
Select DSC > POS. TRACKING > DELETE.
2
Select a vessel.
3
Select YES.
Digital Selective Calling
(Directory, page
8).

Call Log

When the radio receives a DSC call, it records the date and
time, calling station, and type of call in the call log. The radio
also records the latitude and longitude of the calling station if
that data is transmitted with the call.
DSC calls are logged as distress, position, or other calls.
Call Type
Distress
Distress relay
Distress acknowledge
Position send
Position request
Group
All Ships
Individual
When you enter a calling station in your directory, the name of
the station appears in the list of calls. If the calling station is not
saved in your directory, the MMSI number appears in the list of
calls. A symbol indicates the station type.
Symbol
Meaning
Ship station
Group call
Coastal station

Viewing the Calls in the Call Log

1
Select DSC > CALL LOG.
2
Select a call-log category.
3
Select a call.
Information about the call appears on the screen.

Placing a Call from a Call Log

Calls placed from the call log are placed as individual routine
calls.
1
Select DSC > CALL LOG.
2
Select a call log type.
3
Select the MMSI number or the station name.
4
Select CALL.
5
Select a channel on which to transmit the call
page
10).
The radio transmits the channel request with your call.
6
Select CALL.
Saving a Vessel or Station to the Directory from the
Call Log
1
Select DSC > CALL LOG.
2
Select a call-log category.
3
Select the MMSI number you want to save.
4
Select SAVE.
5
Enter or edit the name for the saved vessel or station
(optional)
(Entering Text, page

Deleting a Call Log Entry

1
Select DSC.
2
Select a call-log category.
3
Select the MMSI number or station.
4
Select
.
5
Select DELETE.
Call Log
Distress
Distress
Distress
Position
Position
Other
Other
Other
MMSI Number Format
XXXXXXXXX
0XXXXXXXX
00XXXXXXX
(Channel Lists,
4).
7