Garmin Alpha 200i 소유자 매뉴얼 - 페이지 14
{카테고리_이름} Garmin Alpha 200i에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Alpha 200i 29 페이지. With training
페이지 인쇄
3
Select Add Network.
4
Select a wireless network from the list and enter the
password, if necessary.
The device stores the network information and connects
automatically when you return to this location.
Garmin Explore
The Garmin Explore website and mobile app allow you to plan
trips and use cloud storage for your waypoints, routes, and
tracks. They offer advanced planning both online and offline,
allowing you to share and sync data with your compatible
Garmin device. You can use the mobile app to download maps
for offline access, and then navigate anywhere without using
your cellular service.
You can download the Garmin Explore app from the app store
on your smartphone, or you can go to explore.garmin.com.
Syncing inReach Data
You can sync data from your Garmin Explore account to your
device using the Garmin Explore app. After you make edits to
your data, such as contacts, preset messages, or quick text
messages, you must sync them to your device using the mobile
app.
Open the Garmin Explore app.
Changes made to data such as collections, waypoints,
routes, and tracks update automatically.
You can now sync your data to your Alpha device.
Contact Tracking
You can track other hunters so you know where they are at all
times. You can also send messages to your contacts. One
Alpha handheld device can track up to 20 devices, including
compatible dog collar devices and Alpha handheld devices.
Turning On and Off the Transmitter
Before you can add a contact or initiate an emergency alert, you
must ensure the transmitter is enabled.
NOTE: In cold temperatures, if you transmit when the battery is
low, the device may shut down.
1
Press
to open the status page.
2
Select My ID > Transmitting.
Methods to Add a Contact to a Handheld
Device
Using MURS/VHF: Allows you to add a handheld device contact
after you have placed your handheld device into pairing
mode.
This method is helpful when you are adding a new device to
the system prior to leaving for the hunt
Using Wireless Pairing, page
Entering the device ID: Allows you to add a handheld device
contact that is not in the area. This method requires the
contact to find and communicate their handheld device code
to the person adding the device contact.
This method is helpful when you would like to add a handheld
device contact during a hunt, but you are not near the device.
For example, if you are adding another member of your
hunting party to your handheld device, but you do not own
the device
(Adding a Contact Using a Contact ID, page
Sharing wirelessly using ANT+ wireless technology: Allows
you to add a handheld device that you do not own as a
contact. This method does not require the contact to find and
communicate their device code to the person adding the
10
(Adding a Contact
10).
10).
device. The two handheld devices must be within a range of
3 m (10 ft.) to share data wirelessly.
This method is helpful when you want to add a handheld
device during a hunt without entering the device ID
Contact Using Wireless Pairing, page
Adding a Contact Using Wireless Pairing
Before you can add a contact wirelessly, you should be near the
contact's handheld device.
1
Select Dog List > .
2
Select an option:
• On your handheld device select Add > Pair Handheld,
and follow the on-screen instructions.
• To add a contact by receiving the information from the
contact's handheld device, select Add > Receive from
Handheld.
3
After successfully adding the contact, enter the name of the
contact, and select
.
The contact is added to your handheld device.
You can repeat this procedure using another hunter's handheld
device to add your contact ID to that device.
Adding a Contact Using a Contact ID
Before you can add a hunter using a contact ID, the hunter must
find the contact ID
(Finding Your Contact ID, page
send it to you.
If you are not near the hunter you want to add, you can add the
hunter using a contact ID.
1
On your handheld device, select Dog List >
ID.
2
Select the contact ID for the contact you are adding.
3
Enter the name of the contact, and select
The contact is added to your handheld device.
You can repeat this procedure using another hunter's handheld
device to add your contact ID to that device.
Initiating an Emergency Alert
Before you can initiate an emergency alert, you must turn on the
transmitter
(Turning On and Off the Transmitter, page
Before someone can receive your emergency alert, someone
must add you as a contact
Pairing, page
10).
You can use an emergency alert when you need immediate
assistance and you are away from your group.
Select Dog List >
>
When your contact accepts your emergency alert request,
the device displays a message indicating that your contact
has started navigating to your location.
After receiving the alert, your contacts can navigate to your
location.
Sending a Message to Your Contacts
Before you can send a message to your contacts, you must turn
on the transmitter
(Turning On and Off the Transmitter,
page
10).
You can send and receive automated messages. There are 18
messages you can choose from, such as "Help" and "I'm
Coming."
1
Select Dog List >
> Message.
2
Select a message.
The message is sent to your contacts with your name before the
message. Anyone tracking your handheld device receives the
message.
10).
11) and
> Add > Enter
.
(Adding a Contact Using Wireless
> Yes.
Syncing inReach Data
(Adding a
10).