Garmin BarkLimiter 2 소유자 매뉴얼 - 페이지 5
{카테고리_이름} Garmin BarkLimiter 2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin BarkLimiter 2 10 페이지.
페이지 인쇄
Getting Started
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
BarkLimiter 2 Device Overview
Collar band
Contact points
Charge port (under weather cap)
Power and mode selection button
LED indicator
Tone mode
Auto-rise/smart mode
Vibration mode
Charging the Dog Collar Device
To prevent corrosion, thoroughly dry the contacts on the collar
and the surrounding area before connecting the charging clip.
You should fully charge the battery before you use the device for
the first time. Charging a fully depleted battery typically takes
about two hours.
NOTE: The device does not charge when it is outside the
approved temperature range
1
Pull up the weather cap
2
Plug the power cable into a power source.
The color and number of lit status LED indicators change as
the collar charges. All the status LED indicators turn solid
green when the device is fully charged.
3
After all the status LED indicators turn solid green, remove
the USB cord from the device.
NOTE: The device turns on automatically when you remove it
from the charger.
Getting Started
WARNING
NOTICE
(Specifications, page
4).
from the charging port
.
Turning On the Dog Collar Device
The device remains on until you turn the device off manually
(Turning Off the Dog Collar Device, page
TIP: The device does not issue corrections for two minutes after
any button press, or after the device is removed from the
charger.
Hold the power key until all of the status LED indicators turn
green.
The device beeps, and an LED indicates the active mode. An
LED turns blue when the smart mode is active. An LED turns
green when any other mode is active. After two seconds, a
blue or green LED turns red.
Turning Off the Dog Collar Device
Hold the power key until the status LED turns solid red and
the device beeps.
Attaching the Dog Collar Device to a Collar
Strap
You can attach the dog collar device to a collar strap that is a
maximum of 25.4 mm wide (1 in.) and 2.78 mm thick (0.11 in.).
1
With the buckle facing outward, insert the end of the collar
strap
through the slot
2
Pull approximately two-thirds of the collar strap through the
slot
on the opposite side of the device.
3
Snap the collar band onto the device.
4
Pull the collar strap until it is tight across the front of the
device.
Pairing Your Smartphone with the Dog Collar
Device
You can use the Garmin Canine
smartphone to pair your dog collar device using Bluetooth
Smart wireless technology.
1
Go to www.garmin.com/apps, and download the Garmin
Canine app to your smartphone.
2
Open the Garmin Canine app on your smartphone.
3
Follow the on-screen instructions to create an account, set up
your dog profile, and pair the dog collar device.
4
Bring your smartphone within 10 m (33 ft.) of the dog collar
device.
5
Connect the dog collar device to the charger.
The device enters pairing mode.
When the device is paired with your smartphone, a message
appears.
1)
on the collar device.
app on your compatible
™
®
1