AEG FAVORIT 50879 U 사용자 정보 - 페이지 12

{카테고리_이름} AEG FAVORIT 50879 U에 대한 사용자 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG FAVORIT 50879 U 48 페이지. Aeg dishwasher user manual

Activating rinse aid inflow when 3in1 function is se-

lected

If the 3in1 function is not selected, the rinse aid inflow is always acti-

vated.

If the 3in1 function is selected due to the use of 3in1 detergent, the

rinse aid inflow is deactivated. If the dishes then do not dry sufficiently,

you should re-activate the rinse aid inflow (see also section "Using 3in1

detergents").

1. Press the ON/OFF button.

If the only LED indicator illuminated is one that belongs to a pro-

gramme button, this means that this dishwashing cycle has been acti-

vated. The dishwashing cycle must be deselected:

Press function buttons 2 and 3 simultaneously for approx. 2 seconds.

The LED indicators of all the programme buttons that can be selected

light up.

2. Press function buttons 2 and 3 simultaneously and keep them pressed.

The LED indicators for function buttons 1 to 3 will flash.

3. Press function button 2.

The LED indicator for function button 2 will flash.

The multi-display will indicate the current setting:

4. Pressing function button 2 activates and deactivates the rinse aid dis-

pensing function.

5. Once the multi-display is indicating the required setting, press the ON/

OFF button. The setting is now saved.

Rinse aid inflow deactivated when 3in1 on (factory setting)

Rinse aid inflow activated when 3in1 on