AEG FAVORIT 52860 사용자 설명서 - 페이지 19

{카테고리_이름} AEG FAVORIT 52860에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG FAVORIT 52860 24 페이지. Aeg dishwasher favorit 52860

Make sure that the dimensions of the recess agree with the given dimensions.

Make sure that there are openings in the furniture for the inlet hose, the water drain hose

and the mains cable.

Adjusting the level of the appliance

Make sure that the appliance is level to close and seal the door correctly. If the level of the

appliance is correct, the door does not catch on the sides of the cabinet. If the door does

not close correctly, loosen or tighten the adjustable feet until the appliance is level.

The appliance has safety features to prevent that the water in the appliance goes back into

the drinking water system.

Connected the appliance to a hot (max. 60°) or cold water supply.

If the hot water comes from alternative sources of energy that are more environmentally

friendly (e.g. solar or photovoltaic panels and aeolian), use a hot water supply to decrease

energy consumption.

It is important that a water tap or stopcock is near the dishwasher with easy access.

Connect the inlet hose to a water tap with an external thread of 3/4".

If the water inlet hose is too short, replace the water inlet hose with

an applicable, longer high-pressure hose. Do not connect an exten-

sion hose.

To suit the installation, it is possible to turn the end of the hose that

is connected to the dishwasher. Do these steps :

1. Loosen the retaining nut.

2. Turn the hose.

3. Tighten the retaining nut.

Water connection