Garmin T20 소유자 매뉴얼 - 페이지 13

{카테고리_이름} Garmin T20에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin T20 14 페이지. Dog collar device

Replacing the Dog Collar VHF Antenna

Before you replace the VHF antenna, you must remove all dirt, water, and debris from the dog collar device. You

must also have a small Phillips (#2) screwdriver.

1 Remove the 2 screws

from the cover over the VHF antenna.

2 Remove the VHF antenna cover.

3 Remove the screw

securing the VHF antenna to the back plate.

4 Pull the length of the antenna from the antenna guide to remove the old antenna.

5 Thread the new VHF antenna through the antenna guide.

6 Replace the screw securing the VHF antenna to the back plate.

7 Replace the cover over the VHF antenna.

8 Replace and tighten the 2 screws securing the VHF antenna cover.

9 Secure the antenna with additional antenna clips (optional).

Appendix