Garmin Tri-Tronics PRO70 소유자 매뉴얼 - 페이지 13

{카테고리_이름} Garmin Tri-Tronics PRO70에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Tri-Tronics PRO70 17 페이지.

Install the new battery into the back

plate with the label side up, using the

same orientation as the old battery.

The battery orientation is noted

graphically inside the back plate.

Replace the battery plate to its original

position.

Replace and tighten the battery plate

screws.

With the new battery, connect the

battery connector to the device.

When properly installed, the connector

plug snaps into the port.

Reconnect the rotary switch connector

to the device.

When properly installed, the connector

plug snaps into the port.

Verify the gasket is not damaged and

is completely seated in the groove on

the front half of the device.

While ensuring the battery and rotary

switch wires are not pinched, hold the

back plate and the device firmly

together, and replace all eight security

screws without tightening.

Verify the back plate and the device

are aligned with no gaps.

Tighten the screws evenly.

Verify the gasket is not sticking out of

the device.

Pro 70 Dog Collar Device Components

Security screws

Top plate