AEG FAVORIT 54861 사용자 설명서 - 페이지 6

{카테고리_이름} AEG FAVORIT 54861에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG FAVORIT 54861 28 페이지. Aeg dishwasher favorit 54861

Control panel

Rinse aid

1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a washing

programme operates.

Programme selection buttons

With these buttons you can select the washing programme. Press a programme button,

the related indicator light comes on. Refer to 'Washing programmes' chapter for more data

about the washing programmes.

Use the delay start button to delay the start of the washing programme with an interval

between 1 and 19 hours. Refer to the chapter 'Setting and starting a washing programme'.

The display shows:

• the set level of the water softener.

• Remaining time to the end of the programme.

• Activation/deactivation of the rinse aid dispenser (only with multitab function on).

• End of the washing programme. The display shows a zero.

• Number of hours in delay start.

• Fault codes.

Use the function buttons for these operations:

• To set the water softener. Refer to the chapter 'Setting the water softener'.

• To cancel the washing programme in progress or a delay start in progress. Refer to the

chapter 'Setting and starting a washing programme'.

• To activate/deactivate the multitab function. Refer to the chapter 'Multitab function'.

• To deactivate/activate the rinse aid dispenser, when multitab function is active. Refer to

the chapter 'Multitab function'.

The appliance must be in setting mode for these operations:

• To set a washing programme.

• To set the water softener level.

• To deactivate/activate the rinse aid dispenser.

Press the on/off button. The appliance is in setting mode when:

– All the programme indicator lights come on.

Press the on/off button. The appliance is not in setting mode when:

– Only one programme indicator light comes on

– A washing programme is set. It is necessary to cancel the programme to go back to the

setting mode. Refer to the chapter 'Setting and starting a washing programme".

Indicator lights

Comes on when it is necessary to fill the rinse aid container. Refer to

'Use of rinse aid'.