Brother XL5050 운영 매뉴얼 - 페이지 32

{카테고리_이름} Brother XL5050에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother XL5050 45 페이지. Brother sewing machine operation manual

페이지 인쇄

XL5000us.book Page 31 Tuesday, November 11, 2003 9:25 AM

Lower the buttonhole lever and push it back

slightly.

While gently holding the upper thread, start

the machine.

The bar tacks of the buttonhole are sewn in

the order shown.

Stop the machine when buttonhole stitching is

finished.

I Making a Buttonhole on Stretch Fabrics

When sewing buttonholes on stretch fabric, the

buttonhole stitching is sewn over a gimp thread.

Using tailor's chalk, mark the position of the

buttonhole on the fabric, and then attach the

buttonhole foot and set the pattern selection

dial to " ".

Hook the gimp thread onto the back end of

the buttonhole foot, bring the two gimp

thread ends to the front of the foot, insert

them into the grooves, and then temporarily

tie them there.

Lower the presser foot and start sewing.

Once sewing is completed, gently pull the

gimp thread to remove any slack, and then

trim off the excess.

Making a Buttonhole

(4-Step Buttonhole)

Stitch Length

Pattern

[mm (inch)]

-1.5

(1/64-1/16)

(4-Step

Buttonhole)

Memo

G We recommend that you practice making a

buttonhole on a scrap piece of fabric before

you try it on the actual garment.

G When making buttonholes on soft fabrics,

place stabilizer material on the underside of

the fabric.

Making a buttonhole is a simple process that

provides reliable results.

I Making a Buttonhole

Using tailor's chalk, mark the position and

length of the buttonhole on the fabric.

Attach the buttonhole foot, and then slide the

outside frame of the buttonhole foot as far

back as possible.

Stitch

Width

Foot

[mm (inch)]

Buttonhole

(3/16)

Foot