Brother HL-4140CN 매뉴얼 - 페이지 11

{카테고리_이름} Brother HL-4140CN에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother HL-4140CN 25 페이지. Brother hl-4150cdn: quick start
Brother HL-4140CN에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (2 페이지)

페이지 인쇄

Important Information for Australia

IMPORTANT-For Your Safety

To ensure safe operation the three-pin plug supplied must be inserted only into a standard

threepin power point which is effectively grounded through the normal household wiring.

Extension cords used with the equipment must be three-conductor and be correctly wired to

provide connection to ground. Incorrectly wired extension cords are a major cause of fatalities.

The fact that the equipment operates satisfactorily does not imply that the power is grounded and

that the installation is completely safe. For your safety, if in any doubt about the effective

grounding of the power, consult a qualified electrician.

Important safety instructions

1 Read all of these instructions.

2 Save them for later reference.

3 Follow all warnings and instructions marked on the product.

4 Unplug this product from the wall socket before cleaning the product and the scanner glass.

DO NOT use liquid or aerosol cleaners. Use a dry, lint-free soft cloth for cleaning.

5 DO NOT use this product near water.

6 DO NOT place this product on an unstable cart, stand, or table. The product may fall, causing

serious damage to the product.

7 Slots and openings in the casing at the back or bottom are provided for ventilation; to ensure

reliable operation of the product and to protect it from overheating, these openings must not

be blocked or covered. The openings should never be blocked by placing the product on a bed,

sofa, rug, or other similar surface. This product should never be placed near or over a radiator

or heater. This product should never be placed in a built-in installation unless adequate

ventilation is provided.

8 This product should be connected to an AC power source within the range indicated on the

rating label. DO NOT connect it to a DC power source or inverter. If you are not sure, contact

a qualified electrician.

9 This product is equipped with a 3-wire grounded plug, a plug having a third (grounded) pin.

This plug will only fit into a grounded power outlet. This is a safety feature. If you are unable to

insert the plug into the outlet, call your electrician to replace your obsolete outlet. DO NOT

defeat the purpose of the grounded plug.

10 Use only the power cord supplied with this product.

11 Use the product in a well-ventilated area.

12 DO NOT place anything on top of the power cord including this product. DO NOT allow the

power cord to be stepped on.

13 DO NOT place anything in front of the product that will block received faxes or printed pages.

DO NOT place anything in the path of received faxes or printed pages.

14 DO NOT touch a document during printing.