AEG FAVORIT 60860 사용자 정보 - 페이지 32

{카테고리_이름} AEG FAVORIT 60860에 대한 사용자 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG FAVORIT 60860 48 페이지. Aeg dishwasher favorit 60860
AEG FAVORIT 60860에 대해서도 마찬가지입니다: 사용자 정보 (48 페이지)

페이지 인쇄

If the dishwashing results are not satisfactory

The dishes are still dirty.

• The wrong dishwashing cycle was selected.

• The dishes were loaded is such a way that the dishwashing water did

not reach all items. The baskets for the dishes must not be overload-

ed.

• Filters in the floor of the dishwasher are not clean or incorrectly in-

serted.

• Good quality detergent was not used, or too little was used.

• In the case of scale deposits on the dishes: The special salt dispenser is

empty or the water softening system has been incorrectly set.

• The drain hose is incorrectly positioned.

• If at the end of the dishwashing cycle there is still detergent left in

the detergent dispenser, either the spray arm was jammed or the

spray arm jets are blocked with pollutants in the dishwashing water.

You have the option of removing the spray arms from their fixture for

cleaning (see section "Care and Cleaning").

The dishes do not dry and are not shining.

• Poor quality rinse aid was used.

• The rinse aid dispenser is empty.

There are smears, streaks, milky spots or a shiny bluish coating on

glasses and dishes.

• Lower rinse aid dosage.

There are dried water drops on the glasses and dishes.

• Increase rinse aid dosage.

• The detergent may be the cause. Contact the detergent manufactur-

er's customer advice centre.

Glass corrosion

• Contact the detergent manufacturer's customer advice centre.