AEG FAVORIT 64070 VIL 지침서 - 페이지 27
{카테고리_이름} AEG FAVORIT 64070 VIL에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG FAVORIT 64070 VIL 48 페이지. Electrolux operating and installation instructions dishwasher favorit 64070
AEG FAVORIT 64070 VIL에 대해서도 마찬가지입니다: 지침서 (48 페이지)
페이지 인쇄
Starting a washing programme
In this fully integrated appliance the controls are located on the top of
the door. When selecting a programme, the door needs to be open.
1. Check that the baskets have been loaded
correctly and that the spray arms can rotate
freely
2. Turn on the water tap
3. Press the On/Off button
All the indicator lights of the programme selection buttons
illuminate (setting mode).
4. Setting and starting the programme
a) To select a programme, press the programme button of the
washing programme you wish to select (see "Washing
programmes" chart).
The corresponding indicator light remains illuminated while the
other programme buttons indicator lights turn off.
The running time of the selected programme flashes In the digital
display.
b) To select the delay start of the programme, press the
"delay start" option button until the number of the hours
selected for the delay start, followed by the letter h, will appear
in the digital display (e.g. 1h).
The start of the programme or the countdown of the delay start
will occur only after the closure of the door, until this moment
you can modify the selection made.
Close the dishwasher door.
a) If delay start has not been set, the programme will start
automatically. A point-shaped optical signal appears on the floor
beneath the appliance's door. The punctiform light signal is not
dangerous as it is not a laser light.
If the appliance has been installed higher up with a furniture door
mounted flush, the optical signal will no longer be visible.
If an error message is displayed in the multi-display and/or if an
acoustic error message can be heard after the cycle has begun, please
read the section "What to do when..."
Operating instructions
27