Brother DCP 540CN - Color Inkjet - All-in-One 빠른 설정 매뉴얼 - 페이지 12
{카테고리_이름} Brother DCP 540CN - Color Inkjet - All-in-One에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP 540CN - Color Inkjet - All-in-One 32 페이지. Quick setup guide - french
Brother DCP 540CN - Color Inkjet - All-in-One에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (33 페이지), 빠른 시작 매뉴얼 (19 페이지), (프랑스어) 빠른 설치 매뉴얼 (33 페이지)
페이지 인쇄
STEP1
Setting Up the Machine
4
The LCD shows:
Is Quality OK?
Yes iPress
No
5
Do one of the following:
If all lines are clear and visible, press
(Yes) to finish the quality check.
If you can see missing short lines, press
(No) and go to step 6.
OK
6
The LCD asks you if the print quality is OK for
black and colour. Press
Black OK?
Yes iPress
No
Color OK?
Yes iPress
No
After pressing
black and colour, the LCD shows:
Start Cleaning?
Yes iPress
No
7
Press
cleaning the colours.
8
After cleaning is finished, press Colour Start.
The machine starts printing the Print Quality
Check Sheet again and goes back to step 3.
10
iPress
Poor
(Yes) or
iPress
iPress
(Yes) or
(No) for both
iPress
(Yes), the machine will then start
7
Setting the LCD contrast
You can adjust the LCD contrast for a sharper and
more vivid display. If you are having difficulty reading
the LCD, try changing the contrast setting.
1
Press Menu.
2
Press a or b to choose General Setup.
Press OK.
3
Press a or b to choose LCD Settings.
Press OK.
4
Press a or b to choose LCD Contrast.
Press OK.
5
Press a or b to choose Light, Med or Dark.
Press OK.
6
Press Stop/Exit.
(No).
Note
You can also adjust the angle of the LCD display
by lifting it.