Brother DCP 8085DN 빠른 설정 매뉴얼 - 페이지 5

{카테고리_이름} Brother DCP 8085DN에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP 8085DN 30 페이지. Laser fax/mfc
Brother DCP 8085DN에 대해서도 마찬가지입니다: 부품 참조 목록 (39 페이지), 빠른 설정 매뉴얼 (23 페이지), 서비스 업데이트 정보 (15 페이지), 서비스 매뉴얼 (18 페이지)

페이지 인쇄
Brother DCP 8085DN 빠른 설정 매뉴얼
4

Release the scanner lock

a
Push the lever
a
unlock the scanner.
(The gray scanner lock lever is located at the
back left side, under the document cover b.)
1
5

Connect the power cord

IMPORTANT
DO NOT connect the interface cable yet.
a
Make sure that the machine power switch is off.
Connect the AC power cord to the machine.
b
Plug the AC power cord into an AC outlet. Turn
the power switch on.
Note
If Scanner Locked appears on the LCD,
immediately release the scanner lock and press
Stop/Exit. (See Release the scanner
lock on page 5.)
in the direction shown to
6
Choose your language
(If needed)
a
Press Menu.
b
Press 1.
c
Press 0.
d
Press
2
language.
Press OK.
e
Press Stop/Exit.
7

Set the LCD contrast

(If needed)
If you are having difficulty reading the LCD, try
changing the contrast setting.
a
Press Menu.
b
Press 1.
c
Press 5.
d
Press
—OR—
Press
Press OK.
e
Press Stop/Exit.
or
to choose your
to increase the contrast.
to decrease the contrast.
5