Brother DCP-115C 빠른 시작 매뉴얼 - 페이지 23

{카테고리_이름} Brother DCP-115C에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-115C 33 페이지. Brother dcp-115c: quick start
Brother DCP-115C에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (40 페이지), 빠른 설정 매뉴얼 (33 페이지)

페이지 인쇄

Installing the Driver & Software

For Mac OS

9.1 to 9.2

Important

Make sure that you have finished the

instructions from Step 1 Setting Up the

Machine on page 4-9.

Disconnect the machine from the power socket

and from your computer, if you already

connected an interface cable.

Turn on your Macintosh

Put the supplied CD-ROM into your CD-ROM

drive.

Double-click the Start Here OS 9.1-9.2 icon to

install the printer and scanner drivers. If the

language screen appears, choose your

language.

Click MFL-Pro Suite to install.

Follow the on-screen instructions, and restart

your Macintosh

Lift the scanner cover to its open position.

Connect the USB cable to the USB socket

marked with a

USB socket above and to the left of the ink

cartridge slots, as shown below.

Carefully guide the USB cable into the trench

as shown below, following the trench around

and toward the back of the machine.

Then, connect it to your Macintosh

Improper Setup

• DO NOT connect the machine to a USB port on

a keyboard or a non-powered USB hub.

Brother recommends that you connect the

machine directly to your computer.

• Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Lift the scanner cover to release the lock.

Gently push the scanner cover support down

and close the scanner cover.

Macintosh

symbol. You will find the