Brother DCP-1610WE 빠른 시작 매뉴얼

{카테고리_이름} Brother DCP-1610WE에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-1610WE 2 페이지. Letter / a4 black-and-white multifunction printer
Brother DCP-1610WE에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (2 페이지)

Brother DCP-1610WE 빠른 시작 매뉴얼
DCP‑1610W(E) / DCP‑1612W / MFC‑1910W(E)
Quick Setup Guide
Version B
UK
Unpack the machine and check the components
Watch our FAQ Videos for help
with setting up your Brother
machine:
solutions.brother.com/videos.
1
Remove the packing materials and install the toner cartridge
2
Load paper in the paper tray
3
Connect the power cord and turn on the machine
Back
5
Change your language (if needed)
Only for certain models
1.
(DCP models)
1. Press Menu, and then press ▲ or ▼ to choose 1.General Setup.
2. Press OK.
(MFC models) Press Menu, 0, 0, and go to step 3.
2.
Press ▲ or ▼ to choose 0.Local Language, and then press OK.
3.
Press ▲ or ▼ to select your language, and then press OK.
4.
Press Stop/Exit.
6
Connect the machine to your computer/mobile device
• Windows
PC with a CD‑ROM drive, go to step
®
• Windows
PC without a CD‑ROM drive, go to step
®
• Macintosh, go to step
6B
• Mobile device users with a WPS/AOSS™‑supported access point/router, go to step
Inbox Toner Cartridge
CD‑ROM
To use A5 Long Edge paper.
Front
6A
6B
Not all models are available in all countries.
The latest manuals are available at the Brother
Solutions Center: solutions.brother.com/manuals.
Read the Product Safety Guide first, then read this Quick Setup Guide for the
correct installation procedure.
NOTE:
• The components included in the box and the AC power plug may differ
(For U.K.)
(For Others)
depending on your country.
Telephone Line Cord
• The illustrations in this Quick Setup Guide are based on the MFC‑1910W.
(For MFC models)
• You must purchase the correct interface cable for the interface you want to use.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than
2 metres (6 feet) long.
A5 Long Edge Paper Input
Secure Network Access
Support
Your machine's default password is on the label on the back of the machine
(preceded by "Pwd").
We strongly recommend you change it to protect your machine from
unauthorised access.
Adjust the paper guides to fit
the paper being used.
Select your country/language
4
(Initial setup only)
Depending on your machine, you may be required to set your
country or language.
If required, follow the on‑screen instructions.
6C