AEG Favorit 65080 Vi 사용자 설명서 - 페이지 27
{카테고리_이름} AEG Favorit 65080 Vi에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG Favorit 65080 Vi 40 페이지. Electrolux dishwasher product manual
페이지 인쇄Malfunction
1 short warning tone, con
tinuously repeated, can be
heard,
the cycle indicator for the se
lected wash program is flash
ing:
the control indicator
lights up:
Å 10
fault code
is displayed
in the multi display:
(Problems with water inlet)
2 short warning tones, con
tinuously repeated, can be
heard,
the cycle indicator for the se
lected dishwashing cycle is
flashing,
Å 20
fault code
is displayed
in the multi display. (Prob
lems with water outflow)
3 short warning tones, con
tinuously repeated, can be
heard,
Å 30
Fault code
is displayed
in the multi display.
The cycle is not starting.
Possible cause
Water tap is blocked with
limescale or is faulty.
The tap is turned off.
The filter (where present) in the
threaded hose fitting on the
tap is blocked.
Filters in the base of the wash
ing compartment are blocked.
Water supply hose has not
been correctly positioned.
The sink outlet is blocked.
Water drain hose has not been
correctly positioned.
The anti flood system has been
triggered.
The mains plug is not plugged
in.
A fuse in the house's wiring
system is defective.
For dishwasher models with a
delay start timer:
A start time has been selected.
What to do if...
Remedy
Check the tap and have it re
paired, if necessary.
Turn on the tap.
Clean the filter in the threaded
hose fitting.
Cancel the dishwashing cycle
(see chapter: Starting a dish
washing cycle),
clean filters (see chapter:
Cleaning the filters),
then start the dishwashing cy
cle again.
Check the position of the hose.
Clean the siphon.
Check the position of the hose.
First shut off the water tap,
then switch off the appliance
and contact the Customer Care
Department.
Connect the plug to a mains
socket.
Replace fuse.
If the dishes are to be washed
immediately, cancel the delay
start.
27