Brother DCP-585CW 빠른 설정 매뉴얼 - 페이지 29

{카테고리_이름} Brother DCP-585CW에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-585CW 45 페이지. Quick setup guide - spanish
Brother DCP-585CW에 대해서도 마찬가지입니다: 브로셔 및 사양 (2 페이지), 빠른 설정 매뉴얼 (29 페이지), (영어) 빠른 구성 가이드 (43 페이지)

페이지 인쇄

For Wireless Network Users

Press a or b to choose TKIP or AES for

Encryption Type? and press OK.

Enter the WPA/WPA2-PSK password you

wrote down in step 12 on page 27 using the a,

b keys to choose each letter or number.

You can use the d and c keys to move the

cursor left and right. For example, to enter the

letter a, press the a key once. To enter the

number 3, hold down the a key until it appears.

The letters appear in this order: lower case,

upper case, numbers and then special letters.

(For more information, see Entering Text for

Wireless Settings on page 43.)

Press OK when you have entered all the

characters, then press

settings. Go to i.

Your machine will now try to connect to your

wireless network using the information you

have entered. If successful, Connected will

appear briefly on the LCD.

If your machine does not successfully connect

to your network, verify your network settings

collected in step 12 on page 27 then repeat a

to h to make sure you have entered the correct

information.

If your access point does not have DHCP

enabled you will need to manually configure

the IP address, subnet mask and gateway of

the machine to suit your network. See the

Network User's Guide for details.

Wireless setup is now complete. A four

level indicator on the bottom of your

machine's LCD will show the wireless

signal strength of your access point or

router.

To install MFL-Pro Suite, continue to

step 14.

For Windows

Users:

Now go to

Page 32

For Mac OS

Users:

Now go to

Page 36

Yes to apply your