AEG FAVORIT 77000 W0P/AU 사용자 설명서 - 페이지 17

{카테고리_이름} AEG FAVORIT 77000 W0P/AU에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG FAVORIT 77000 W0P/AU 24 페이지.

페이지 인쇄

pliance is in setting mode, refer to

"Setting and starting a program".

2. Press and hold, at the same time, De-

lay and Start until the indicators of

start to flash.

3. Press Option .

• The indicators of

• The indicator

flash.

• The display shows the current set-

ting.

11. TECHNICAL INFORMATION

Dimensions

Electrical connection

Water supply pressure

Water supply

Capacity

1) Connect the water inlet hose to a water tap with a 3/4'' thread.

2) If the hot water comes from alternative sources of energy, (e.g. solar panels, wind

turbine energy), use the hot water supply to decrease energy consumption.

and

go off.

continues to

Width / Height / Depth

(mm)

Refer to the rating plate.

Voltage

Frequency

Min. / max. (bar / MPa)

Cold water or hot water

Place settings

4. Press Option to change the setting.

5. Press the on/off button to deactivate

the appliance and to confirm the set-

and

ting.

6. Adjust the released quantity of rinse

aid.

7. Fill the rinse aid dispenser.

ENGLISH

Rinse aid dis-

penser off

Rinse aid dis-

penser on

596 / 850 / 610

220-240 V

50 Hz

(0.5 / 0.05 ) / (8 / 0.8 )

max. 60 °C