Brother DCP-8110DN 고급 사용자 설명서 - 페이지 33

{카테고리_이름} Brother DCP-8110DN에 대한 고급 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-8110DN 39 페이지. Printer
Brother DCP-8110DN에 대해서도 마찬가지입니다: 매뉴얼 (36 페이지), 고급 사용자 설명서 (50 페이지), 네트워크 매뉴얼 (29 페이지), 매뉴얼 (27 페이지), 빠른 설정 매뉴얼 (23 페이지), 사용자 설명서 (23 페이지), 제품 안전 매뉴얼 (23 페이지), 제품 안전 매뉴얼 (22 페이지)

페이지 인쇄

Options

Optional paper tray

(LT-5400)

An optional lower tray can be installed, and it

can hold up to 500 sheets of 80 gsm paper.

When an optional tray is installed, the

machine can hold up to 800 sheets of plain

paper.

For setup, see the Instructions that we have

supplied with the lower tray unit.

WARNING

If you use a Lower Tray, DO NOT carry the

machine with the Lower Tray as you may

be injured or cause damage to the machine

because it is not attached to the Lower

Tray.

Memory board

DCP-8110D and DCP-8110DN have 64 MB

of standard memory, and DCP-8155DN has

128 MB. All models have one slot for optional

memory expansion. You can increase the

memory up to maximum of 320 MB for

DCP-8110D and DCP-8110DN, and 384 MB

for DCP-8155DN by installing one SO-DIMM

(Small Outline Dual In-line Memory Module).

SO-DIMM Types

You can install the following SO-DIMMs:



256 MB Kingston KTH-LJ2015/256



256 MB Transcend TS256MHP423A

Note

• For more information, visit the Kingston

Technology website at

http://www.kingston.com/.

• For more information, visit the Transcend

website at http://www.transcend.com.tw/.

In general, the SO-DIMM must have the

following specifications:

Type

CAS latency

Clock

frequency

Capacity

Height

DRAM type

Note

• There might be some SO-DIMMs that will

not work with the machine.

• For more information, call the dealer you

bought the machine from or Brother

Customer Service.

144-pin and 16-bit output

267 MHz (533 Mb/S/Pin) or

256 MB

30.0 mm

DDR2 SDRAM