Brother DCP-8250DN 빠른 설정 매뉴얼 - 페이지 13

{카테고리_이름} Brother DCP-8250DN에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-8250DN 17 페이지. Web connect guide - english
Brother DCP-8250DN에 대해서도 마찬가지입니다: 매뉴얼 (21 페이지), 고급 사용자 설명서 (44 페이지)

페이지 인쇄
Brother DCP-8250DN 빠른 설정 매뉴얼
Wired Network
For Wired Network Interface Users
(Mac OS X 10.5.8 - 10.7.x)
12
Before you install
a
Make sure your machine is connected to the
power and your Macintosh is ON. You must be
logged on with Administrator rights.
Important
For users of Mac OS X 10.5.7 or lower, upgrade
to Mac OS X 10.5.8 - 10.7.x. (For the latest
drivers and information for the Mac OS X you are
using, visit http://solutions.brother.com/.)
Note
If you want to add the PS driver (BR-Script3
printer driver), please go to the Brother Solutions
Center at http://solutions.brother.com/ and visit
FAQ's on your model page for instructions.
b
Remove the protective cap from the Ethernet
port marked with a
c
Connect the network interface cable to the
Ethernet port and then connect it to a free port
on your hub.
d
Make sure your machine's power switch is on.
symbol.
13
Install MFL-Pro Suite
a
Put the installer CD-ROM into your CD-ROM
drive.
b
Double-click the Start Here OSX icon. If
prompted, select your model and then follow
the on-screen instructions.
Important
DO NOT cancel any of the screens during the
installation. It may take a few minutes for the
installation to complete.
c
Choose your machine from the list, and then
click OK.
Note
If your machine is not found over the network,
confirm your network settings. See Before you
install on page 13.
Macintosh
13