Brother DCP-8250DN 고급 사용자 설명서 - 페이지 12

{카테고리_이름} Brother DCP-8250DN에 대한 고급 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-8250DN 44 페이지. Web connect guide - english
Brother DCP-8250DN에 대해서도 마찬가지입니다: 매뉴얼 (21 페이지), 빠른 설정 매뉴얼 (17 페이지)

페이지 인쇄
Brother DCP-8250DN 고급 사용자 설명서
Chapter 2
j
To set up a restricted user, press
Enable or Disable for each operation,
as follows: Press Copy. Then press
Enable or Disable. After you have set
Copy, repeat these steps for Scan,
Direct Print, Print and
Web Connect.
k
Press
and repeat steps g to j to
enter each additional user and
password.
l
Press Stop/Exit.
Note
You cannot use the same name as
another user's name.
Changing user name, password or
settings for restricted users
a
Press Menu.
b
Press a or b to display
General Setup.
Press General Setup.
c
Press a or b to display Security.
Press Security.
d
Press Function Lock.
e
Press Setup ID.
f
Enter the four-digit administrator
password by pressing the buttons on the
Touchscreen.
Press OK.
g
Press a or b to display the existing
restricted user you want to change.
Press the user name.
h
Press Change.
To change the user name, enter a new
user name by pressing the buttons on
the Touchscreen. (uu Basic User's
Guide: Entering text)
Press OK.
8
i
To change the password, enter a new
four-digit user password by pressing the
buttons on the Touchscreen.
Press OK.
j
To change a restricted user's settings,
press a or b to display the setting you
want to change. Press the setting and
then press Enable or Disable.
Repeat this step until you are finished
making changes.
k
Press Stop/Exit.
Note
You cannot use the same name as
another user's name.
Reset existing restricted users
a
2
Press Menu.
b
Press a or b to display
General Setup.
Press General Setup.
c
Press a or b to display Security.
Press Security.
d
Press Function Lock.
e
Press Setup ID.
f
Enter the four-digit administrator
password by pressing the buttons on the
Touchscreen.
Press OK.
g
Press a or b to display the existing
restricted user you want to reset.
Press the user name.
h
Press Reset.
i
Press Yes to reset the existing restricted
user.
j
Press Stop/Exit.
2