Brother DCP-J100 고급 사용자 설명서 - 페이지 35

{카테고리_이름} Brother DCP-J100에 대한 고급 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-J100 44 페이지. Color multi-function printer
Brother DCP-J100에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (25 페이지), 사용자 설명서 (48 페이지), 제품 안전 매뉴얼 (18 페이지)

페이지 인쇄
Brother DCP-J100 고급 사용자 설명서

Checking the ink volume

You can check the amount of ink that is left in
the cartridge.
(MFC-J200)
a
Press Menu, 1, 3.
b
The LCD shows the ink volume.
c
Press a or b to choose the colour you
want to check.
d
Press Stop/Exit.
(DCP-J100 and DCP-J105)
a
Press Menu.
b
Press a or b to choose 1.Ink.
Press OK.
c
Press a or b to choose 3.Ink Volume.
Press OK.
The LCD shows the ink volume.
BK:-ooooonn+
d
Press a or b to choose the colour you
want to check.
e
Press Stop/Exit.
NOTE
You can check the ink volume from your
computer.
(See Software and Network User's
Guide.)
A
A
A
e
Routine maintenance
Packing and shipping
the machine
When you transport the machine, use the
packing materials that came with your
machine. Follow the instructions below to
correctly package your machine. Damage
caused to your machine during transit may
not be covered by your warranty.
The machine should be adequately insured
with the carrier.
IMPORTANT
It is important to allow the machine to
"park" the print head after a print job.
Listen carefully to the machine before
unplugging it to make sure that all
mechanical noises have stopped. Not
allowing the machine to finish this parking
process may lead to print problems and
possible damage to the print head.
a
Unplug the machine from the electrical
socket.
b
Place both hands under the plastic tabs
on both sides of the machine to lift the
scanner cover into the open position.
Then unplug the machine from the
telephone wall socket and take the
telephone line cord out of the machine.
c
Unplug the interface cable from the
machine, if it is connected.
A
A
31