Brother DCP-J140W 빠른 설정 매뉴얼 - 페이지 22

{카테고리_이름} Brother DCP-J140W에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-J140W 33 페이지. Advanced users manual spainish - english and spanish
Brother DCP-J140W에 대해서도 마찬가지입니다: 고급 사용자 설명서 (22 페이지), 제품 안전 매뉴얼 (16 페이지), 빠른 시작 매뉴얼 (21 페이지), 고급 사용자 설명서 (21 페이지), (영어) 빠른 구성 가이드 (32 페이지), (고급 사용자 가이드 (23 페이지)

페이지 인쇄

For Wireless Network Users

One-push configuration

using WPS or AOSS™

(Windows

Macintosh)

Confirm your wireless access point/router has

the WPS or AOSS™ symbol as shown below.

Place the Brother machine within range of your

WPS or AOSS™ access point/router. The

range may differ depending on your

environment. Refer to the instructions provided

with your access point/router.

On your machine, press Menu.

Press a or b to choose 3.Network and press

OK.

Press a or b to choose 3.WPS/AOSS and press

OK.

When WLAN Enable? is displayed, press a to

accept.

This will start the wireless setup wizard.

Note

If your wireless access point/router supports WPS

(PIN Method) and you want to configure your

machine using the PIN (Personal Identification

Number) Method, see Configuration using the

PIN Method of Wi-Fi Protected Setup in the

Network User's Guide.

When the LCD shows Press Key on rtr,

press the WPS or AOSS™ button on your

wireless access point/router. See the user's

guide of your wireless access point/router for

instructions.

Then press a (Next) and your machine will

now automatically detect which mode (WPS or

AOSS™) your wireless access point/router

uses and try to connect to your wireless

network.

and

A connection result message appears for

60 seconds on the LCD and a wireless LAN

report will automatically be printed.

If the connection failed, check the error code on

the printed report and refer to Troubleshooting

on page 23.

Wireless setup is now complete.

To install MFL-Pro Suite, continue to

step 13.

For Windows

Users:

Now go to

Page 25

For Macintosh Users:

Now go to

Page 28