Fujitsu ABT36AG3 운영 매뉴얼 - 페이지 17
{카테고리_이름} Fujitsu ABT36AG3에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ABT36AG3 17 페이지. Air conditioner ceiling suspension type
페이지 인쇄OPERATING TIPS
AUTO Restart
In Event of Power Interruption
G Should the power supply to the air conditioner be inter-
rupted by a power failure, the air conditioner will restart
automatically in the previously selected mode once the
power is restored.
G Should a power failure occur during TIMER operation,
the timer will be reset and the unit will begin (or stop)
operating under the new timer setting. In this event, the
TIMER indicator lamp (green) will flash (see Page. 5).
Temperature and Humidity Range
Outdoor temperature
Indoor temperature
Indoor humidity
G If the air conditioner is operated under higher temperature conditions than those listed, the built-in protection circuit may
operate to prevent internal circuit damage. Also, during Cooling and Dry modes, if the unit is used under conditions of
lower temperatures than those listed above, the heat-exchanger may freeze, leading to water leakage and other damage.
G Do not use this unit for any purposes other than the Cooling, (*)Heating, Dehumidifying, and air-circulation of rooms in
ordinary dwellings.
COOLING MODEL
HEAT & COOL MODEL
(Reverse Cycle)
G Use of other electrical appliances (electric shaver, etc.) or
nearby use of a wireless radio transmitter may cause the
air conditioner to malfunction. In this event, temporarily
disconnect the power supply, reconnect it, and then use
the remote control unit to resume operation.
Cooling/Dry Mode
About 0 to 52˚C
ABT30AG
ABT36AG
About 21 to 52˚C
ABT45AG
ABT54AG
ABT30RG
ABT36RG
About 0 to 52˚C
ABT45RG
ABT54RG
About 18˚C or more
About 80% or less
If the unit is used for long
periods under high-hu-
midity conditions, conden-
sation may form on the
surface of the indoor unit,
and drip onto the floor or
other objects underneath.
*Heating Mode
—
—
About -5 to 21˚C
About 30˚C or less
—
17