Fujitsu ABYA12-24LBTH 설치 매뉴얼 - 페이지 13

{카테고리_이름} Fujitsu ABYA12-24LBTH에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ABYA12-24LBTH 21 페이지. Vrf system indoor unit floor / ceiling type

6.4. Connection of wiring

(1) Remove the electric component box.

Electric component box

CAUTION

• Do not remove the RFM fixing screws. If the stays are

removed, the electric component box will fall.

• If you use as "Floor console", you must remove screws

and RFMs (2 position).

When removing the electric component box, remove the

clamp from the cables.

After completing the work, fasten the cables as they were

originally by installing the clamp.

Cables

Remove the clamp.

(2) Pull out the electric component box.

Electric component box

RFM

Clamp

Install the clamp.

Electric component box

(3) Remove the electric component box cover.

Remove the 3 tapping screws.

Base

CAUTION

• Be careful not to pinch the lead cables between the

electric component box and base.

(4) Wiring

* When there is 1 transmission cable or remote controller

cable, fasten it the same way as shown in the ﬁ gure with a

binder (medium).

] 1

6.5. External input and external output

(Optional parts)

Controller PCB

Input No Voltage terminal (CN17)

Input Voltage terminal (CN6)

Output terminal (CN16)

Electric component box cover

Remote controller cable

Y1: Red, Y2: White, Y3: Black

X1, X2: Transmission cable

Binder (Medium)

(Accessories)

GND

L, N: Power supply cable

En-13