AEG KDW 3 사용자 지침 - 페이지 33

{카테고리_이름} AEG KDW 3에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG KDW 3 40 페이지. Electrolux user instructions dishwasher kdw 3

Connecting the Dishwasher

The dishwasher is fitted with safety devices that prevent the return of

wash water into the drinking water system and comply with the appli-

cable plumbing regulations.

• The dishwasher should be connected to a cold water supply.

• The dishwasher should not be connected to a hot water supply.

Lowest permitted water pressure:

1 bar (=10N/cm2 =100 kPa)

Highest permitted water pressure:

10 bar (=100 N/cm2 =1 MPa)

The water inlet hose must not be kinked, crushed or entangled when it

is being connected up.

Connect the threaded hose fitting (DIN 259) on the water inlet hose to

a tap with an external thread (¾ inch). Handtighten the threaded hose

fitting only.

• In order that access to the tap in the kitchen is not limited by the use

of the dishwasher, we recommend the installation of an additional

tap, or the fitting a two way adapter to the existing tap.

• If you need a longer water inlet hose contact your local AEG Service

Force Centre.

Installation and Connection Instructions

For a water pressure of less than 2 bar

please seek advice from AEG Service

Force.

In the case of a water pressure greater

than 10 bar, a pressure reduction valve

must be used (available from your

dealer).