AEG KO_FAVORIT 64800 사용 설명서 - 페이지 12
{카테고리_이름} AEG KO_FAVORIT 64800에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG KO_FAVORIT 64800 43 페이지. Electrolux operating instructions dishwasher favorit 64800
AEG KO_FAVORIT 64800에 대해서도 마찬가지입니다: 사용 설명서 (42 페이지)
페이지 인쇄
Before using your dishwasher for the first time
1. Ensure that the electrical and water connections comply with the
installation instructions.
2. Remove all packaging from inside the appliance.
3. Set the water softener.
4. Pour 0,5 l of water inside the salt container and then fill with salt.
5. Fill the rinse-aid dispenser.
Setting the water hardness range
The dishwasher is equipped with a water softener designed to remove
minerals and salts from the water supply, which would have a detrimental or
adverse effect on the operation of the appliance.
The higher the content of these salts, the harder your water is.
Water hardness is measured in equivalent scales, German, French degrees and
PPM (parts per Million).
The softener should be adjusted according to the hardness of the water in
your area. Your local Water Authority can advise you on the hardness of the
water in your area.
The dishwasher is factory set at level 4.
If this level is not suitable for your area the softener should be adjusted.
Level
0
1
2
3
4
5
6
7
8
9
12
Water hardness
°dH
(german degrees)
(french degrees)
0 - 4
5 - 8
9 - 11
12 - 17
18 - 22
23 - 28
29 - 33
34 - 39
40 - 45
46 - 50
°TH
(parts per million)
0 - 8
0 - 80
9 - 14
81 - 140
15 - 20
141 - 200
21 - 30
201 - 300
31 - 40
301 - 400
41 - 50
401 - 500
51 - 60
501 - 600
61 - 70
601 - 700
71 - 80
701 - 800
81 - 90
801 - 900
Use of salt
PPM
YES
YES
YES
YES
YES
YES
YES
YES
YES
NO