AEG KO_FAVORIT 64800 사용 설명서 - 페이지 38

{카테고리_이름} AEG KO_FAVORIT 64800에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG KO_FAVORIT 64800 43 페이지. Electrolux operating instructions dishwasher favorit 64800
AEG KO_FAVORIT 64800에 대해서도 마찬가지입니다: 사용 설명서 (42 페이지)

페이지 인쇄

Installation and connection instructions

Adjusting the worktop

You can move the worktop forward or

backward by 25 mm in order to align the

machine with other kitchen units.

Simply unscrew the two front retaining

screws, move the top to the required

position and then retighten the screws.

Fitting under a counter

(kitchen worktop or sink)

By removing the machine's worktop, you

can install it under a close fitting sink unit

or a pre-existing top, providing the

dimensions of the recess correspond to

those shown in the picture.

Proceed as follows:

- Remove the machine's worktop by

unscrewing the two front retaining

screws, pull from the front and slide out

the rear slots, lifting the worktop.

Insert the machine after adjusting height and levelling with the adjustable

feet. When inserting the machine, ensure that the water inlet and drain

hoses are not kinked or squashed.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on the

levelling spacers, either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet

until the machine is perfectly level.

IN02

IN04