AEG OKO FAVORIT 40300 사용자 지침 - 페이지 21

{카테고리_이름} AEG OKO FAVORIT 40300에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG OKO FAVORIT 40300 40 페이지. Electrolux dishwasher user instructions 40300

Starting the Wash Programme

1. Check that when the dishes and cutlery are loaded into the dishwasher

the spray arms are free to rotate.

2. Open the tap fully.

3. Close dishwasher door.

4. Turn the programme selector clockwise to A

Table").

For interference suppression reasons, only operate the programme

selector with the dishwasher switched off. It is also possible that the

automated addition of detergent will be triggered.

5. Turn the programme selector to the required programme (see "Pro-

gramme Table").

Power indicator light illuminates. The selected wash programme starts.

The programme selector rotates during the wash programme and indi-

cates the position that has been reached in the programme.

If a wash programme has been started even though the tap was closed,

turn the programme selector to the I position, open the tap and start

the programme again.

Only change or interrupt a wash programme in progress if it is abso-

lutely necessary.

Changing the wash programme

1. Turn the programme selector to the I position. Power indicator light

goes out, wash programme stops.

Hot steam may escape when the door is opened. Open the door care-

fully.

2. Open dishwasher door and check whether there is still detergent in the

container. Refill the container if necessary.

3. Close dishwasher door.

4. Turn the programme selector clockwise to A

Table").

5. Turn the programme selector to the required programme (see "Pro-

gramme Table"). Power indicator light illuminates, wash programme

starts.

Operating Instructions

or B or C (see "Programme